Page MenuHomePhabricator
Files F7313293

No OneTemporary
Actions

View Options

diff --git a/config.ini.sample b/config.ini.sample
index 631b8ae..05fb392 100644
--- a/config.ini.sample
+++ b/config.ini.sample
@@ -1,82 +1,80 @@
; SylkServer configuration file
[Server]
; The following settings are the default used by the software, uncomment
; them only if you want to make changes
; default_application = conference
; Map user part of the Request URI to a specific application
; application_map = 123:conference,test:irc-conference
; trace_dir = /var/log/sylkserver
; trace_sip = False
; trace_msrp = False
; trace_notifications = False
; TLS can be used for encryption of SIP signaling and MSRP media. TLS is
; disabled by default. To enable TLS, you must have a valid X.509
; certificate and configure it below, then set the local_tls_port in the SIP
; section and use_tls in MSRP section
; The X.509 Certificate Authorities file
; ca_file = /etc/sylkserver/tls/ca.crt
; The file containing X.509 certificate and private key in unencrypted format
; certificate = /etc/sylkserver/tls/sylkserver.crt
; verify_server = False
[SIP]
; SIP transport settings
; IP address used for SIP signaling; empty string or any means listen on interface used
; by the default route
; local_ip =
; Ports used for SIP transports, if not set to any value the transport will be disabled
; local_udp_port = 5060
; local_tcp_port = 5060
; local_tls_port =
; If set all outbound SIP requests will be sent through this SIP proxy
; outbound_proxy =
; A comma-separated list of hosts or networks to trust.
; The elements can be an IP address in CIDR format, a
; hostname or an IP address (in the latter 2 a mask of 32
; is assumed), or the special keywords 'any' and 'none'
; (being equivalent to 0.0.0.0/0 and 0.0.0.0/32
; respectively). It defaults to 'any'.
; trusted_peers =
[MSRP]
; MSRP transport settings
-; Indicate if ACM should be offered. If set to true (default) the server will offer 'actpass'
-; for outbound sessions
-; use_acm = True
-
+; By default MSRP media is using TCP, to enable TLS you must configure a
+; X.509 certificate in the server section and enable it here
; use_tls = False
[RTP]
; RTP transport settings
; Allowed codec list, valid values: G722, speex, PCMU, PCMA, iLBC, GSM
; audio_codecs = G722,speex,PCMU,PCMA
; Port range used for RTP
; port_range = 50000:50500
; SRTP valid values: disabled, mandatory, optional
; srtp_encryption = optional
; RTP stream timeout, session will be disconnected after this value
; timeout = 30

File Metadata

Mime Type
text/x-diff
Expires
Sat, Feb 1, 11:30 AM (1 d, 5 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
3489293
Default Alt Text
(2 KB)

Event Timeline