(NOTE) This script is available in [[sip_clients]] package that must be installed separately from SIP SIMPLE client SDK package. ``` Usage: sip-message [options] [user@domain] This will either sit idle waiting for an incoming MESSAGE request, or send a MESSAGE request to the specified SIP target. In outgoing mode the program will read the contents of the messages to be sent from standard input, Ctrl+D signalling EOF as usual. In listen mode the program will quit when Ctrl+D is pressed. Options: -h, --help show this help message and exit -a NAME, --account=NAME The account name to use for any outgoing traffic. If not supplied, the default account will be used. -c FILE, --config-file=FILE The path to a configuration file to use. This overrides the default location of the configuration file. -s, --trace-sip Dump the raw contents of incoming and outgoing SIP messages. -j, --trace-pjsip Print PJSIP logging output. -n, --trace-notifications Print all notifications (disabled by default). -b, --batch Run the program in batch mode: reading control input from the console is disabled. This is particularly useful when running this script in a non-interactive environment. -m MESSAGE, --message=MESSAGE Contents of the message to send. This disables reading the message from standard input. ``` = Example for receiving a message = ``` adigeo@ag-imac3:~$sip-message Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using default account: 31208005169@ag-projects.com Registering ""Adrian G." <sip:31208005169@ag-projects.com>" at 81.23.228.150:5060 REGISTER was successful Contact: <sip:4f855cb09b@192.168.1.6:51408> (expires in 300 seconds) Other registered contacts: <sip:31208005169@192.168.1.122:5062;line=634g6j67> (expires in 480 seconds) <sip:5dac4295e9@192.168.1.6:51375> (expires in 95 seconds) <sip:31208005169@192.168.1.123:5060> (expires in 77 seconds) <sip:31208005169@192.168.1.1;uniq=5B2860C44383A3D6705629A7E1FB8> (expires in 1563 seconds) <sip:31208005169@80.101.96.20:61578> (expires in 3069 seconds) Press Ctrl+D to stop the program. Received MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>", Content-Type: text/plain dsgsgddsgs Received MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>", Content-Type: text/plain Testing short text messages in page mode! ``` = Example for sending a message = ``` adigeo@ag-imac3:~$sip-message -a umts ag@ag-projects.com Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using account 'umts': adi@umts.ro Press Ctrl+D on an empty line to end input and send the MESSAGE request. dsgsgddsgs Sending MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>" to "<sip:ag@ag-projects.com>" using proxy 81.23.228.150:5060 MESSAGE was accepted by remote party. adigeo@ag-imac3:~$sip_message -a umts ag@ag-projects.com Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using account 'umts': adi@umts.ro Press Ctrl+D on an empty line to end input and send the MESSAGE request. Testing short text messages in page mode! Sending MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>" to "<sip:ag@ag-projects.com>" using proxy 81.23.228.150:5060 MESSAGE was accepted by remote party. ```

(NOTE) This script is available in the [[sip_clients]] package which must be installed separately from the SIP SIMPLE client SDK package. ``` Usage: sip-message [options] [user@domain] This will either sit idle waiting for an incoming MESSAGE request, or send a MESSAGE request to the specified SIP target. In outgoing mode the program will read the contents of the messages to be sent from standard input, Ctrl+D signalling EOF as usual. In listen mode the program will quit when Ctrl+D is pressed. Options: -h, --help show this help message and exit -a NAME, --account=NAME The account name to use for any outgoing traffic. If not supplied, the default account will be used. -c FILE, --config-file=FILE The path to a configuration file to use. This overrides the default location of the configuration file. -s, --trace-sip Dump the raw contents of incoming and outgoing SIP messages. -j, --trace-pjsip Print PJSIP logging output. -n, --trace-notifications Print all notifications (disabled by default). -b, --batch Run the program in batch mode: reading control input from the console is disabled. This is particularly useful when running this script in a non-interactive environment. -m MESSAGE, --message=MESSAGE Contents of the message to send. This disables reading the message from standard input. ``` = Example for receiving a message = ``` adigeo@ag-imac3:~$sip-message Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using default account: 31208005169@ag-projects.com Registering ""Adrian G." <sip:31208005169@ag-projects.com>" at 81.23.228.150:5060 REGISTER was successful Contact: <sip:4f855cb09b@192.168.1.6:51408> (expires in 300 seconds) Other registered contacts: <sip:31208005169@192.168.1.122:5062;line=634g6j67> (expires in 480 seconds) <sip:5dac4295e9@192.168.1.6:51375> (expires in 95 seconds) <sip:31208005169@192.168.1.123:5060> (expires in 77 seconds) <sip:31208005169@192.168.1.1;uniq=5B2860C44383A3D6705629A7E1FB8> (expires in 1563 seconds) <sip:31208005169@80.101.96.20:61578> (expires in 3069 seconds) Press Ctrl+D to stop the program. Received MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>", Content-Type: text/plain dsgsgddsgs Received MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>", Content-Type: text/plain Testing short text messages in page mode! ``` = Example for sending a message = ``` adigeo@ag-imac3:~$sip-message -a umts ag@ag-projects.com Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using account 'umts': adi@umts.ro Press Ctrl+D on an empty line to end input and send the MESSAGE request. dsgsgddsgs Sending MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>" to "<sip:ag@ag-projects.com>" using proxy 81.23.228.150:5060 MESSAGE was accepted by remote party. adigeo@ag-imac3:~$sip_message -a umts ag@ag-projects.com Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using account 'umts': adi@umts.ro Press Ctrl+D on an empty line to end input and send the MESSAGE request. Testing short text messages in page mode! Sending MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>" to "<sip:ag@ag-projects.com>" using proxy 81.23.228.150:5060 MESSAGE was accepted by remote party. ```

(NOTE) This script is available in the [[sip_clients]] package thatwhich must be installed separately from the SIP SIMPLE client SDK package. ``` Usage: sip-message [options] [user@domain] This will either sit idle waiting for an incoming MESSAGE request, or send a MESSAGE request to the specified SIP target. In outgoing mode the program will read the contents of the messages to be sent from standard input, Ctrl+D signalling EOF as usual. In listen mode the program will quit when Ctrl+D is pressed. Options: -h, --help show this help message and exit -a NAME, --account=NAME The account name to use for any outgoing traffic. If not supplied, the default account will be used. -c FILE, --config-file=FILE The path to a configuration file to use. This overrides the default location of the configuration file. -s, --trace-sip Dump the raw contents of incoming and outgoing SIP messages. -j, --trace-pjsip Print PJSIP logging output. -n, --trace-notifications Print all notifications (disabled by default). -b, --batch Run the program in batch mode: reading control input from the console is disabled. This is particularly useful when running this script in a non-interactive environment. -m MESSAGE, --message=MESSAGE Contents of the message to send. This disables reading the message from standard input. ``` = Example for receiving a message = ``` adigeo@ag-imac3:~$sip-message Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using default account: 31208005169@ag-projects.com Registering ""Adrian G." <sip:31208005169@ag-projects.com>" at 81.23.228.150:5060 REGISTER was successful Contact: <sip:4f855cb09b@192.168.1.6:51408> (expires in 300 seconds) Other registered contacts: <sip:31208005169@192.168.1.122:5062;line=634g6j67> (expires in 480 seconds) <sip:5dac4295e9@192.168.1.6:51375> (expires in 95 seconds) <sip:31208005169@192.168.1.123:5060> (expires in 77 seconds) <sip:31208005169@192.168.1.1;uniq=5B2860C44383A3D6705629A7E1FB8> (expires in 1563 seconds) <sip:31208005169@80.101.96.20:61578> (expires in 3069 seconds) Press Ctrl+D to stop the program. Received MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>", Content-Type: text/plain dsgsgddsgs Received MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>", Content-Type: text/plain Testing short text messages in page mode! ``` = Example for sending a message = ``` adigeo@ag-imac3:~$sip-message -a umts ag@ag-projects.com Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using account 'umts': adi@umts.ro Press Ctrl+D on an empty line to end input and send the MESSAGE request. dsgsgddsgs Sending MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>" to "<sip:ag@ag-projects.com>" using proxy 81.23.228.150:5060 MESSAGE was accepted by remote party. adigeo@ag-imac3:~$sip_message -a umts ag@ag-projects.com Accounts available: 'alice', 'ew', 'mrg', 'pbx', 'tf', 'umts', 'unet', default Using account 'umts': adi@umts.ro Press Ctrl+D on an empty line to end input and send the MESSAGE request. Testing short text messages in page mode! Sending MESSAGE from ""Adi UMTS" <sip:adi@umts.ro>" to "<sip:ag@ag-projects.com>" using proxy 81.23.228.150:5060 MESSAGE was accepted by remote party. ```