SIP2SIP

= Device Configuration =

[[TOC(WikiStart, Sip*, depth=3)]]

There are thousands of SIP devices on the market, for how to configure them we advise you to consult the support forum of the device manufacturer.

Please do not open a ticket related to how a particular device must be configured.

Setup your SIP device as follows:

== Account Credentials ==

Account credentials are used for authentication and authorization of SIP requests performed by the SIP device.

|| Username || XXX||
|| Password|| YYY||
|| Domain||sip2sip.info||

* Replace XXX with your username and YYY with your password received during the registration of your SIP account
* Always Register must be On
* Set the Registration refresh interval to 600 seconds

The address of the server is automatically discovered by the SIP device by using DNS.

[wiki:SipDevices Specific SIP devices configuration]

== SIP Outbound Proxy ==

To traverse NAT you must use the proxy server:

|| Host || Port || Protocol || proxy.sipthor.net||
|| proxy.sipthor.net|| 5060|| UDP Port ||
|| proxy.sipthor.net|| 5060|| TCP||
|| proxy.sipthor.net|| 5061|| LTS Protocol || UDP ||

== XCAP root ==

If you use SIMPLE presence you need to set XCAP root:

|| XCAP Root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ ||

== MSRP Relay ==

If you use SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.