SIP2SIP

= Device Configuration =

<acronym title="WikiStart, Sip*, depth=3">TOC</acronym>

There are thousands of SIP devices on the market, for how to configure them we advise you to consult the support forum of the device manufacturer.

Please do not open a ticket related to how a particular device must be configured.

Setup your SIP device as follows:

SIP Credentials

SIP Credentials are used for authentication and authorization of SIP requests performed by the SIP device.

	Username		XXX
	Password		YYY
	Domain		sip2sip.info

• Replace XXX with your username and YYY with your password received during the registration of your SIP account
• Always Register
• Set the Registration refresh interval to 600 seconds

[wiki:SipDevices Specific SIP devices configuration]

SIP Outbound Proxy

Outboud proxy

proxy.sipthor.net

Though optional, is recommend that you always use the outbound proxy setting as this helps the NAT traversal and your device remains always reachable.

Some poorly implemented SIP devices are not able to determine the address of the proxy. Here are the details that you could enter manually:

	Host		proxy.sipthor.net
	Port		5060
	Protocol		UDP

XCAP root

If you use SIMPLE presence you need to set XCAP root:

XCAP Root

https://xcap.sipthor.net/xcap-root@sip2sip.info/

MSRP Relay

If you use SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.